Commercial interior painting is a tedious and delicate project that requires a certain degree of organization, commitment, and most importantly, technique. Professional painting contractors make these qualities look easy to achieve, but for the average person, attaining professional painting finishes is a challenge. There are many techniques and methods used by professional painting teams to get that flawless, rich result you want with interior painting.

Continue below to learn what it really takes to get a professional-looking paint job before you decide on a Do-It-Yourself approach.

Commercial Painting Services Indianapolis Indiana 317-253-0531

Professional Painting for Commercial Interiors

Painters Tape

When you tape up baseboards before painting, it can seem like a pretty straightforward task. Apply the tape so that the woodwork is covered and move on; right? Well, many times, after the painting is finished and the tape is removed, you can find streaks or drops that managed to seep their way through. To avoid this, do what the pro’s do and use a putty knife to apply the painting tape on baseboards and molding. Press the knife against the tape to ensure a thorough seal. This prevents any paint from getting through.

Drywall Repair and Sanding

One of the most important steps to painting is preparation. Preparation of course includes choosing the proper paint, deciding on a color, purchasing needed supplies, and laying out protective drop canvas for flooring and furniture. But when we mentioned preparation in terms of what the professionals suggest, we mean hole-patching and sanding. All holes and deficits should be filled in with a joint-compound patching product, smoothed down evenly, and allowed to dry completely. Once these areas of dry, you can sand away all the uneven surfaces.

It is vital to sand away any surface flaws, like spackle, joint-compound patches, nicks, nail holes, scores, scratches, chips, and more the best you can. Do this using a fine grit sandpaper and sanding pole. The fine grit will protect your walls from over-sanding, while the pole will allow you to reach all the way to the high walls and ceiling. Sand baseboards, molding, walls, and more to get an even smooth surface. Once you have an even and smooth surface, you can move forward with your painting project.

Paint and Primer

When joint compound is painted over, it can sometimes absorb all the moisture from the paint and leave a duller, discolored look. This makes all the patched areas on a wall noticeable. To avoid this problem, which professionals refer to as “flashing”, be sure to apply a primer to your walls before painting. But to paint like a professional, don’t just use any primer, use a tinted primer. Although white primer is acceptable and frequently used, professionals typically use a gray-colored primer, or a primer that is close to the color of the finishing paint. This covers patched areas and existing paint better than plain white or ivory primers. This results in a more vibrant finish and less applications.

Paint Boxing

Although you can purchase the same color in five cans, it is not guaranteed that all five cans will look exactly the same. This can be evident in a paint job when a new container is opened halfway through painting. It can result in a different color tone on a wall. To avoid this, professional contractors “box” their paint by pouring all cans into one large bucket to achieve one consistent color.

Paint Application

Ever wonder why a self-paint job looks streaky and a professional’s is always smooth and even? Well, the secret is adding a paint extender or paint conditioner into your paint. Popular products, like Floetrol, are designed to slow down the drying process of the paint, allowing a more even application and finish. Not only do paint extenders hide brush strokes, but they also eliminate dark lap marks from painting over semi-dried paint.

Ceilings

When ceilings are textured or bumpy, it can be virtually impossible to paint a clean line between the wall and the ceiling. For this reason, professionals will use a screwdriver to scrape a ridge along the edge of the walls and ceiling. This creates a platform for painting a smooth straight line between ceiling and wall and prevents paint from sticking to ceiling bumps. The resulting ridge should be fine enough so that the lost texture is never noticed, but wide enough for brush bristles to fit.

Are you looking for a company that can ensure your commercial interior remodel or painting project comes out exactly the way you envision it? Contact BAF Corporation at 317-253-0531 for comprehensive commercial painting and drywall services in Indianapolis, Indiana. We work with clients all throughout the state.